AUROSI Low-Voltage Battery Energy Storage System

AUROSI Low-Voltage Battery Energy Storage System
UL Certification
UL 9540A
IEC Certification
IEC 62619 IEC 62477
UN38.3 Certification

AUROSI Low-Voltage Battery Energy Storage System

A low-voltage battery energy storage system for a wide range of applications, including low-voltage grids, co-location with renewable energy systems, and end users. Independent 16 kWh units enable flexible system configurations to meet capacity requirements and site conditions.

Installation in 2.5 Hours
Independent Module Operation
Integrated Battery, EMS and AC Combiner Panel
Lightweight, Modular Design

 

 

Product Features

Reliability & Safety

Reliability & Safety

  • Independent 16 kWh units allow other batteries to continue normal operation in the event of a unit failure.
  • 10-year standard warranty
  • Low DC voltage of 60 V or less
  • Isolated DC/AC topology
Efficiency

Efficiency

  • Each unit has its own power conversion system (PCS) for direct AC conversion.
  • Flexibly accommodates unbalanced three-phase loads. Independent control of each phase supports simultaneous charging and discharging across phases.
Scalability

Scalability

  • Flexible expansion in 16 kWh increments by adding units
  • Supports coordinated operation with third-party power conditioning systems
Other Features

Other Features

  • Footprint of 0.44 m² per cluster; expandable to a maximum of 112 kWh per cluster
  • The smallest transport and installation unit is a single unit (under 155 kg), making delivery and installation easier.

Triple-Protection Battery System

01 Integrated Fire Suppression System

  • Automatically activates at 170°C or above during cell thermal runaway
  • Dual suppression: rapid cooling + inert gas

02 Coordinated Multi-Sensor Protection

  • Overvoltage / undervoltage protection
  • Overcurrent / short-circuit protection
  • Thermal management
  • Insulation fault detection (ISO detection)

03 Explosion-Prevention Valve Protection

  • Automotive-grade materials
  • IP66-rated, with ventilation under normal conditions
  • Positive-pressure venting structure + oxygen-free environment
  • Rapid pressure relief eliminates the risk of fire and explosion.

Battery Specifications

Item 2-Hour Configuration 4-Hour Configuration
Number of Battery Units 6 12 (6 units × 2 rows)
PCS Rated Apparent Output Power (kVA) 40 49.9 (output limit setting)
Energy Storage Capacity (kWh) 96 192
Electrical Configuration Three-phase, three-wire AC 202 V / 210 V Three-phase, three-wire AC 202 V / 210 V
Rated Frequency (Hz) 50 / 60 (automatic detection) 50 / 60 (automatic detection)
Ingress Protection Rating IP66 IP66
Isolation Method Isolated Isolated
Installation in Areas with Severe Salt Exposure Supported Supported
Dimensions (W × H × D, mm) 880 × 2,140 × 483 880 × 2,140 × 483 × 2 rows
Total Weight (kg) 977 1,954
Notice: These specifications are not final. Some parameter limits may be subject to change.